Omron CS Series Rack PLC

Omron Industrial Automation: is a globally recognised manufacturer of industrial automation control systems and equipment, electronic components, automotive electronics, healthcare products and public transportation equipment.

Omron CS1 CPU Series PLC

Fast and powerful CPU's for any task

The Omron CS1 Series Range of CPU's are available in two processor speeds, each in various memory capacities. The CS1 series range from basic CPU models, to more advanced versions for dual redundant operation, support I/O hot swapping. All Omron CPU's have a dedicated board slot with a direct CPU-bus connection, in which a serial communications board or loop control board can be mounted.

All Omron CS1 series CPU units support IEC61131-3 Structured text and ladder language. Omron's extensive function block library helps reduce programming effort while creating tailored functions blocks to suit users specific needs.

Omron CS1 Series Power Supply

Expand with up to 7 racks

The Omron CS1 systems can operate on 24 VDC power supply or on a 100 -240 VAC mains. For small scale systems with mainly digital I/O a low cost capacity power supply can be used. For systems with many more analogue I/O and communication units, a larger power supply unit maybe required.

Omron PLC racks are available in several sizes, from 2 to 10 slots wide. Special backplanes are required for duplex systems. Depending on the CPU type, up to 7 expansions can be installed to the CPU rack, providing a total capacity of 80 I/O units. The total length of the expansion cables of any one system maybe up to 12m.

Omron CS1 Digital Unit Series

Up to 96 I/O points per unit – input, output or mixed

With the Omron CS Series, Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence control. A full range of units, from high speed DC inputs to relay outputs allow users to adapt the CS1 to any specific needs.

Omron CS1 units are available with various I/O densities and connection technologies. Up to 16 I/O points can be wired to units with detachable M3 screw terminals directly. High density 32 and 64 point I/O units are equipped with standard 40 pin connectors. Prefabricated cables / wiring are available for easy interfacing to high density I/O units.

Omron CS1 Analogue Unit Series

From basic analogue I/O to process control

The Omron CS1 offers a wide choice of analogue input units. Fit for any industrial application, from low speed to multi channel temperature measurement to high speed, high accuracy data acquisition. Analogue outputs can be used for accurate control or external indication.

The use of advanced units with built in scaling, filtering and alarm functions reduce the need for complex PLC programming. High accuracy process I/O units support an extensive range of sensors, for fast and accurate data acquisition. All process and temperature I/O units provide isolation between all individual channels.

Omron CS1 Position Motion Units

Add motion control to any CS1 PLC

The Omron CS1 series range offers from simple position measurement to multi axis synchronized motion control.

Main Features:

• Counter units gather position information from SSI- or incremental encoders. Actual positions are compared with internally stored target values
• Position control Units are used for point-to-point positioning with servo drives or stepper motors. Target data and acceleration/deceleration curves can be adjusted on-the-fly
• Position- and motion control Units equipped with MECHATROLINK-II interface can control multiple drives through a single high-speed link. Message routing through mutliple communication layers allows the attached drives to be configured from any point in the control network

Omron CS1 Communications Unit

Open to any communication, standard or user-defined

The Omron CS1 series provides both standardised open network interfaces and cost efficient high speed proprietary network links. Datalinks between PLC's or to higher level information systems can be made using Serial or Ethernet links, or the easy to use Controller Link network.

Omron support 2 major field network, DeviceNet and PROFIBUS-DP. For high speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully use configurable Serial and CAN based communication can be used to emulate a variety of application specific protocols.